Configure Time-Base ACLs

A network administrator has a situation that requires time-based ACLs. Users are not allowed to access the Internet during business hours, except during lunch and after hours until 7 p.m. when the office closes. This is a time-based ACL that supports the requirement:

R1(config)# time-range employee-time

R1(config-time-range)# periodic weekdays 12:00 to 13:00

R1(config-time-range)# periodic weekdays 17:00 to 19:00

R1(config-time-range)# exit

R1(config)# access-list 100 permit ip any time-range employee-time

R1(config)# access-list 100 deny ip any any

R1(config)# interface FastEthernet 0/1

R1(config-if)# ip access-group 100 in

R1(config-if)# exit

In this example, the commands allow IP access to the Internet during lunch time and after work hours. ACL 100 permits employee traffic to the Internet during lunch and after work hours between 5 PM and 7 PM.

By vichhaiy Posted in Cisco

One comment on “Configure Time-Base ACLs

  1. Pingback: PSTN vs ISDN |

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s