WiMAX and Wi-Fi Comparison

WiMAX is similar to the wireless standard known as Wi-Fi, but on a much larger scale and at faster speeds. A nomadic version would keep WiMAX-enabled devices connected over large areas, much like today.s cell phones. We can compare it with Wi-Fi based on the following factors.

IEEE Standards:

Wi-Fi is based on IEEE 802.11 standard where as WiMAX is based on IEEE 802.16. However both are IEEE standards.

Range:

Wi-Fi typically provides local network access for around a few hundred feet with speeds of up to 54 Mbps, a single WiMAX antenna is expected to have a range of up to 40 miles with speeds of 70 Mbps or more. As such, WiMAX can bring the underlying Internet connection needed to service localWi-Fi networks.

Scalability:

Wi-Fi is intended for LAN applications, users scale from one to tens with one subscriber for each CPE device. Fixed channel sizes (20MHz).

WiMAX is designed to efficiently support from one to hundreds of Consumer premises equipments (CPE)s, with unlimited subscribers behind each CPE. Flexible channel sizes from 1.5MHz to 20MHz.

Bit rate:

Wi-Fi works at 2.7 bps/Hz and can peak up to 54 Mbps in 20 MHz channel.

WiMAX works at 5 bps/Hz and can peak up to 100 Mbps in a 20 MHz channel.

Quality of Service:

Wi-Fi does not guarantee any QoS but WiMax will provide your several level of QoS.

As such, WiMAX can bring the underlying Internet connection needed to service local Wi-Fi networks. Wi-Fi does not provide ubiquitous broadband while WiMAX does.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s